FREE SHIPPING

Victron Energy Battery Charging/Monitoring 50A 3 Way Solar Kit Victron Energy Battery Charging/Monitoring 50A 3 Way Solar Kit

VEKIT50A
Victron Energy Battery Charging/Monitoring 50A 3 Way Solar Kit

$1671 inc GST.

Our Best Price

Qty:     

Shipping & Handling Calculator:

Post Code:
Model No VEKIT50A
Description Victron Energy Battery Charging/Monitoring 50A 3 Way Solar Kit
Weight(kg) 8
Brand Victron Energy

Product Descriptions:
Victron Battery Charging/Monitoring 50A 3 Way Solar Kit 
includes the essential components for any hybrid setup and offers easy expandability to fit your growing needs. All you need is a battery, solar panels, and a bit of assembly, and you're good to go! This kit is perfect for charging lithium batteries in Caravans, Camper trailers, 4WDs, and motorhomes. An excellent choice for batteries over 200Ah.

This system offers a 3-way charging setup, which consists of the following:


Kit Includes:

1 x 
Victron SmartSolar MPPT 100/50
1 x Victron ORION XS 12/12-50A
1 x 
Victron VECIP43-12/50-1+1
1 x 
Victron Smart Shunt 300A/50mV
1 x 
Victron VBP48-100
1 x 
Victron Smart Battery Sense LR
1 x 
Victron Battery isolation switch ON/OFF 275A

All components have built-in Bluetooth connectivity for easy monitoring and programming are lithium compatible.


  • Victron Energy SmartSolar 12V/24V 50A Solar Charge Controller MPPT Type SCC110050210 (Bluetooth Smart Built-in)

    SmartSolar MPPT 100/50 solar charge controller from Victron Energy with:

    • 12V/24V auto select battery voltage
    • 50A rated charge current
    • 700W @ 12V or 1400W @ 24V maximum PV power
    • Automatic load disconnect
    • 98% peak efficiency
    • Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

    Bluetooth Smart built-in: dongle not needed

    The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.


    VE.Direct

    For a wired data connection to a Color Control panel, Venus GX, PC or other devices

    Ultra-fast Maximum Power Point Tracking (MPPT)
    Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

    Advanced Maximum Power Point Detection in case of partial shading conditions
    If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximise energy harvest by locking to the optimum MPP.

    Outstanding conversion efficinecy
    No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).

    Flexible charge algorithm
    Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

    Extensive electronic protection
    Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor compensates absorption and float charge for temperature.

    Real-time data display options
    - Apple and Android smartphones, tablets, and other devices.
    - Color Control panel.

    Victron Energy SmartSolar MPPT 100/50 SCC110050210

    Victron Energy Adaptive DC to DC Charger 12V-12V 50A for use in Dual Battery Systems charged with an Intelligent Alternator ORI121217040

    Engineered from the ground up, the Orion XS redefines adaptive DC-DC charging. For use in dual battery systems charged with an (intelligent) alternator. This device not only ensures top-tier performance but also guarantees the safety of your system.

    Stay in charge with configurable input and output currents, and rest assured that your Orion XS will run at full capacity up to 40°C. The innovative aluminium circuit board cooling technology delivers an astonishing 98% efficiency without the need for fans.

    As an integral part of your Victron system, the Orion XS offers full (remote) monitoring and control capabilities, giving you complete command of your device and system.

    • Fully configurable
    • Engine shutdown detection
    • Intelligent charge algorithms
    • Efficient cooling
    • Works with VictronConnect
    • Remote monitoring optional


    Configurable charging
    Precisely set the input and output current with simple controls. This helps protect alternators against overloading and to charge the service battery properly, especially in case of intelligent alternators.

    Parallel to increase output current
    An unlimited number of Orion XS devices can be connected in parallel. Making scaling the output current to match your system’s requirement easy.

    Smart alternator compatibility
    With its built-in engine shutdown detection, the Orion XS guarantees the charger only draws power when the engine is running. It also helps retrieving proper charge current from intelligent alternators as found in Euro 5 & Euro 6 engines.

    Adaptive charge algorithm
    The Orion XS includes customisable charging algorithms and 8 battery preset modes. For lead acid batteries, these settings ensure optimal absorption times for both shallow and deep discharges.

    Complete electronic protection
    The Orion XS comes equipped with comprehensive electronic protection against overload, short circuit and excessive temperatures. It will automatically reduce the output power when maximum product temperature is reached.

    Low temperature shutdown & undervoltage protection
    To prevent damage of lithium batteries, the charger will turn off automatically at low temperatures and when the input voltage drops below a user-configurable lockout value, protecting the starter battery from deep discharge.

    Dust & waterproof
    The Orion XS is designed to withstand dust and water pollution and has an IP65 classification.

    Victron Energy ORION XS 12/12-50A ORI121217040

    Victron Energy Phoenix Smart IP43 SLA/LiFePO4 Charger 12V 50A (1+1 output) 230V PSC125051085



    This charger requires an AU/NZ AC Power Cord - Sold separately

    Click here to view

     

    12 Volt 50 Amp

    Bluetooth Smart enabled
    Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

    Phoenix Smart (1+1): two outputs to charge 2 battery banks
    The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.

    Automatic voltage compensation
    The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.

    Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
    The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.

    The right amount of charge: variable absorption time
    When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the
    absorption time is automatically increased to make sure that the battery will be fully charged.

    Preventing damage due to excessive gassing: the BatterySafe mode
    If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically
    limiting the rate of voltage increase once the gassing voltage has been reached

    Less maintenance and aging when the battery is not in use: the Storage Mode

    The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours.
    In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to
    ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

    Also charges Li-ion (LiFePO4) batteries
    Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port.
    Alternatively full control of voltage and current can be achieved with Bluetooth.

    Fully programmable charge algorithm
    The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface.
    Three preprogrammed algorithms can be selected with the mode button (see specifications).

    Remote on-off
    The remote on/off consists of two terminals: Remote H and Remote L.
    A remote on/off switch or relay contact can be connected between H and L.
    Alternatively, terminal H can be pulled high, or terminal L can be pulled low.
    See manual for details.

    VE.Direct interface
    For a wired data connection to a Color Control panel, PC or other devices.
    Please see the VictronConnect app under Downloads / Software on our website.

    Programmable relay
    Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.

    Victron Energy VECIP43-12/50-1+1 PSC125051085

     

    Victron Energy Smart Shunt 300A/50mV Battery Monitor SHU050130050

    The Smart Battery Shunt

    The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display.

    The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device, connected via a VE.Direct cable.

    The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.

    The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

    Differences compared to BMV712 Battery Monitor
    - No programmable visual and audible alarm.
    - No programmable relay. 

    Specifications:

    • Supply voltage range: 6.5 - 70 VDC
    • Current draw: < 1mA
    • Input voltage range: auxiliary battery 6.5 - 70 VDC
    • Battery capacity: (Ah) 1 - 9999 Ah
    • Operating temperature range: -40 +50°C (-40 - 120°F)
    • Measures voltage of second battery, or temperature, or midpoint: Yes
    • Temperature measurement range: -20 +50°C
    • VE.Direct communication port: Yes

      Victron Energy Smart Shunt 300A/50mV Battery Monitor SHU050130050

    Victron Energy 6-35VDC BatteryProtect 12/24V 220A Smart Battery Protector BPR048100400


    24-64VDC BatteryProtect 48V 100A

    The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Programming made easy
    The BatteryProtect can be set to engage / disengage at several different voltages.
    The seven segment display will indicate which setting has been chosen.

    A special setting for Li-ion batteries
    In this mode the Battery Protect can be controlled by the VE.Bus BMS.

    Ultra-low current consumption
    This is important in case of Li-ion batteries, especially after low voltage shutdown.
    Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

    Over voltage protection
    To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.

    Ignition proof
    No relays but MOSFET switches, and therefore no sparks.

    Delayed alarm output
    The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

    Delayed load disconnect and delayed reconnect
    The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
    The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

    Victron Energy VBP48-100 BPR048100400

    Victron Energy Long Range Bluetooth Smart Battery Voltage & Temperature Sensor using VE.Smart Network Wireless Communication SBS050150200


    Long Range Model - Up to 10 metre operating range

    Voltage and temperature measurement

    Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT solar chargers. When measuring voltage and temperature, charging of batteries will improve, which increases charging efficiency and prolongs battery life. Suitable for lead and for lithium batteries.

    Improves battery charge

    By measuring voltage at the battery terminals, voltage loss is avoided due to conductivity resistance, thus ensuring correct charging voltage. In the case of lead batteries, data from the battery temperature are used to adjust the charging voltage values: cold batteries require higher charging voltage while hot batteries require lower charging voltage. When looking forward to lithium batteries, data from the battery temperature is used to disable charging when the batteries are too cold: charging lithium batteries at or below freezing causes permanent damage to the cells.

    See - no wires

    The connection between Smart Battery Sense and one or more solar chargers is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart. Transferred data can be used simultaneously by one, two or more solar chargers connected to the same 12V, 24V or 48V battery. The intelligent network is configured using the VictronConnect app.

    Simple, setup, easy to use

    The installation is simple, fast and uncomplicated. All you have to do is connect the two terminals of the device to the battery terminals and then the Smart Battery Sense device directly to the battery using self-adhesive tape. 

    Introducing the VE.Smart Network

    A VE.Smart Network is a wireless network which allows a number of Victron products to exchange information. It is a wireless technology using Bluetooth Smart.

    Use VE.Smart to add remote voltage- and temperature- sensing to your Victron MPPT Solar Chargers. Connect the new Smart Battery Sense, to a Solar Charger. The Solar Charger will receive battery voltage & temperature information, and use that data to optimize its charge parameters. This will improve charging-efficiency and prolong battery life.

    Victron Energy Smart Battery Sense LR SBS050150200

    Victron Energy Battery isolation switch ON/OFF 275A VBS127010010

  • Victron Energy marine grade Battery Isolator Switch for systems up to 48VDC.

    Featuring heavy duty terminals and robust plastic construction, it is an ideal product for use in Marine, RV and 4x4 applications where the switch requires external mounting or exposure to the elements.

    Features:

    • Unique ergonomic and aesthetic knob design
    • Knobs removable for isolation / safety
    • Surface or panel mounted options provides flexibility when installing
    • Meets ISO8846 ignition protection, suitable for use in engine room
    • Suitable for applications up to 48VDC

    Battery Switch 270A

    Max. cont. current  275A
    One Minute Rating 450A
    Cranking Rating 1200A
    Voltage Rating 48V
    Terminal material  Tin-plated copper
    Hex nut material Tin-plated copper
    Terminal Diameter 9.53mm
    Recommended torque 8 N·m / 70 lbf·inch
    Base material Glass fibre reinforced nylon
    Weight 200 g
    Dimensions (hxwxd) 69 x 69 x 73 mm
    Mounting Surface or Rear Panel mount
    Ignition Protection ISO8846 / SAE J1171
    Victron Energy  Battery isolation switch VBS127010010



Featured Brands